document number: 31045 for technical questions, contact: ff2aresistors @vishay.com www.vishay.com revision: 03-mar-10 233 crcc vishay dale thick film resistor/capacitor chip, surface mount features ? single component reduces board space and component counts ? choice of dielectric characteristics x7r or y5u ? wrap around termination ? thick film resistor/capacitor element ? inner electrode protection ? flow and reflow solderable ? automatic placement capability, standard size notes ? packaging: see appropriate catalog or web page. ? power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material . standard electrical specifications global model size resistor characteristics capacitor characteristics inch metric power rating p 70 c w temperature coefficient ppm/c res. tol. % res. range dielectric temperature coefficient % cap. tol. % cap. voltage v dc cap. range pf crcc1206 1206 3216 0.125 200 5 10 to 1m x7r 15 20 50 10 to 270 crcc1206 1206 3216 0.125 200 5 10 to 1m y5u + 22, - 56 20 50 270 to 1800 resistor ? operating temperature range: - 55 c to + 125 c ? technology: thick film capacitor ? operating temperature range: x7r - 55 c to + 125 c y5u - 30 c to + 85 c ? maximum dissipation factor: 2.5 % technical specifications parameter unit resistor x7r capacitor y5u capacitor rated dissipation at 70 c w 0.125 - - capacitor voltage rating v - 50 50 dielectric withstanding voltage (5 s, 50 ma charge) v dc - 125 125 category temperature range c - 55/+ 125 - 55/+ 125 - 30/+ 85 insulation resistance > 10 10 > 10 10 > 10 10 weight/1000 pieces g 0.65 2 5.5 global model resista n ce v alue res. tolera n ce capacita n ce v alue (pf) cap. tolera n ce packagi n g crcc1206 2 digit significant fig u re, f = 1 % 2 digit significant fig u re, k = 10 % ea = lead (p b )-free, t/r (4000 pieces) follo w ed b y a m u ltiplier g = 2 % follo w ed b y a m u ltiplier m = 20 % 100 = 10 j = 5 % 100 = 10 pf 683 = 6 8 k 271 = 270 pf 105 = 1.0 m 182 = 1 8 00 pf global part number information new global part numbering: crcc1206472j220mtf (preferred part numbering format) crcc1206472j220mtf historical part number example: crcc1206472j220mr02 (will continue to be accepted) crcc1206 472 j 220 m r02 model resista n ce v alue res. tolera n ce capacita n ce v alue cap. tolera n ce packagi n g tf = tin/lead, t/r (4000 pieces)
www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31045 234 revision: 03-mar-10 crcc vishay dale thick film resistor/capac itor chip, surface mount dimensions size dimensions in millimeters inch metric l w h t1 t2 1206 3216 3.2 0.15 1.6 0.15 0.55 0.15 0.5 0.25 0.5 0.25 size solder pad dimensions in millimeters reflow soldering wave soldering inch metric a b l a b l 1206 3216 0.9 1.7 2.0 1.1 1.7 2.2 derating - 55 - 25 0 25 50 75 100 125 150 175 120 100 8 0 60 40 20 0 ambient temperature in c 70 rated power in % schematic performance test conditions of test test results (typical test lots) rc endurance test at 70 c mil-std-202 method 108 1000 h at 70 c, 1.5 h ?on?, 0.5 h ?off? (5 % + 2 ) 20 % dielectric withstanding voltage mil-std-202 method 301 125 v dc , 5 s, 50 ma charge no physical damage thermal shock mil-std-202 method 107 100 cycles, - 55 c to + 125 c (5 % + 2 ) 20 % moisture mil-std-202 method 106 omit steps 7a and b (5 % + 2 ) 20 % resistance to soldering heat eia 575 10 s at 260 c solder bath temperature (5 % + 2 ) 20 % high temperature exposure eia 575 125 c for 100 h (5 % + 2 ) 20 % low temperature operation eia 575 1 h at - 55 c then 45 min at 50 v (5 % + 2 ) 20 % solderability and leaching eia 575 3.12 condition c 95 % coverage applicable specifications ? ipc standards ?eia 575
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
